Juniper-networks SRX 210 Bedienungsanleitung Seite 96
- Seite / 176
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
4. Plug the RJ-45 to DB-9 serial port adapter into the serial port on the management
device (see Figure 25 on page 79).
5. Connect the other end of the Ethernet cable to the console port on the services
gateway (see Figure 25 on page 79).
6. Turn on the power to the management device.
7. Start your asynchronous terminal emulation application (such as Microsoft Windows
HyperTerminal) and select the appropriate COM port to use (for example, COM1).
8. Configure the port settings shown in Table 30 on page 80.
Table 30: Port Settings for Connecting to the Console Port
ValuePort Settings
9600Bits per second
8Data bits
NoneParity
1Stop bits
NoneFlow control
9. Power on the services gateway by pressing the Power button on the front panel.
10. Verify that the Power LED on the front panel turns green.
The terminal emulation screen on your management device displays the startup
sequence. When the services gateway has finished starting up, a login prompt appears.
11. Log in as the user root. No password is required at initial connection, but you must
assign a root password before committing any configuration settings.
Related
Documentation
Connecting an SRX210 Services Gateway to the CLI Remotely on page 80•
• Performing Initial Software Configuration on the SRX210 Services Gateway Using the
CLI on page 89
• SRX210 Services Gateway Software Configuration Overview on page 85
• SRX210 Services Gateway Secure Web Access Overview on page 95
Connecting an SRX210 Services Gateway to the CLI Remotely
You can connect an SRX210 Services Gateway to the CLI from a remote location through
two dial-up modems:
•
A modem that is connected to the console port on the services gateway
•
A second modem connected to a remote management device
Copyright © 2013, Juniper Networks, Inc.80
SRX210 Services Gateway Hardware Guide
- SRX210 Services Gateway 1
- END USER LICENSE AGREEMENT 2
- Table of Contents 5
- Part 4 Appendixes 8
- Part 5 Index 9
- About This Guide 11
- Table 1: Notice Icons 12
- Obtaining Documentation 13
- Documentation Feedback 14
- Requesting Technical Support 14
- CHAPTER 1 19
- Components and Specifications 23
- ValueSpecification 24
- Memory, and PoE Versions) 25
- ComponentNumber 26
- Interfaces (continued) 28
- SRX210 Services Gateway LEDs 29
- Front Panel LEDs 30
- LEDs (continued) 31
- Ethernet Port LEDs 31
- Table 10 on page 16 32
- Boot Devices 33
- Dual-Root Partitioning Scheme 33
- Air flow 35
- CAUTION: 37
- ATTENTION: 37
- CHAPTER 3 39
- Introduction 39
- Supported Modem Types 39
- Services Gateway 40
- Using the 3G ExpressCard 40
- Key Features 40
- Physical Specifications 41
- CommandAction 43
- CDMA ExpressCards 43
- Commands (continued) 44
- Ethernet Support 45
- PoE Classes and Power Ratings 46
- Gateway (continued) 47
- Interface Modules 49
- Gateway Installation 53
- Installation (continued) 54
- Requirements 56
- Requirement for Clearance 58
- Recommended 58
- ClearanceLocation 58
- Documentation 59
- CHAPTER 8 63
- CHAPTER 9 65
- QuantityComponent 66
- QuantityPart 67
- Installation 69
- Rack-Mount Installation 70
- Desk-Mount Installation 71
- Wall-Mount Installation 72
- CHAPTER 11 73
- 60-Watt Power Supply 74
- 150-Watt Power Supply 75
- Mounting Brackets 76
- Services Gateway in a Rack 77
- Power Supply Adapter Tray 77
- Vertical Stand 79
- Services Gateway on a Desk 79
- Services Gateway on a Wall 81
- CHAPTER 12 83
- Autoinstallation 91
- CHAPTER 14 93
- 192.168.1.1 and use DHCP to 94
- ValuePort Settings 96
- Gateway End 97
- CHAPTER 15 101
- J-Web Interface 107
- Start to 109
- Your ActionFunctionField 110
- Services Gateway Hardware 113
- Hardware Components 115
- Components (continued) 116
- CHAPTER 17 117
- Possible Causes and 119
- Corrective Actions 122
- Possible Cause and Corrective 124
- ActionMeaningLED Status 124
- Appendixes 127
- Information 129
- Qualified Personnel Warning 132
- ADSL 2/2+ A 135
- Class 1 Laser Product Warning 141
- Class 1 LED Product Warning 141
- Laser Beam Warning 142
- Warnings 143
- Jewelry Removal Warning 144
- Lightning Activity Warning 146
- Operating Temperature Warning 146
- Product Disposal Warning 147
- Korean Class B Warning 151
- SRX210 Services Gateway Power 155
- Guidelines, Requirements, and 155
- Specifications 155
- GuidelineSite Wiring Factor 156
- 1.5 A maximum 157
- AC system current rating 157
- Grounding lug 158
- APPENDIX C 159
- Port (10/100 Mbps) 160
- Port (1 Gbps) 160
- Port (1 Gbps) (continued) 161
- Hardware 163
- Power Supply 0 165
- Contacting Customer Support 166
- Packing the Services Gateway 167
- Index on page 155 169
Verwandte Produkte und Handbücher für Hardware Juniper-networks SRX 210
Hardware Juniper-networks M5 Bedienungsanleitung
(205 Seiten)
(205 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.034 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern