Juniper-networks SRX 210 Bedienungsanleitung Seite 93

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 176
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 92
CHAPTER 14
Connecting the SRX210 Services Gateway
to Management Devices
This chapter includes the following topics:
Connecting an SRX210 Services Gateway to the J-Web Interface on page 77
Connecting an SRX210 Services Gateway to the CLI Locally on page 79
Connecting an SRX210 Services Gateway to the CLI Remotely on page 80
Connecting the Modem at the SRX210 Services Gateway End on page 81
Connecting the Modem to the Console Port on the SRX210 Services Gateway on page 82
Connecting to the CLI at the User End for the SRX210 Services Gateway on page 83
Connecting an SRX210 Services Gateway to the J-Web Interface
If you plan to use the setup wizard to configure the SRX210 Services Gateway, you must
connect your management device (such as a laptop or desktop computer) to one of the
built-in Ethernet ports 0/1 through 0/7 as shown in Figure 24 on page 78. Do not use
built-in Ethernet port 0/0.
NOTE: To access the J-Web interface, your management device requires a
supported browser: either Microsoft Internet Explorer version 7.0 or Mozilla
Firefox version 3.x.
77Copyright © 2013, Juniper Networks, Inc.
Seitenansicht 92
1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 175 176

Kommentare zu diesen Handbüchern

Keine Kommentare