Juniper-networks SRX 210 Bedienungsanleitung PDF herunterladen (Seite 34)

NOTE: SRX210 Services Gateway that ship from the factory with Junos OS

Release 10.0 is formatted with the dual-root partitioning scheme.

Existing SRX210 Services Gateways that are running Junos OS Release 9.6 or earlier use

the single-root partitioning scheme.

While upgrading these devices to Junos OS Release 10.0, you can choose to format the

storage media with dual-root partitions (strongly recommended) or retain the existing

single-root partitioning.

For instructions on upgrading to Junos OS Release 10.0, see the following topics:

•

Initial Configuration for Security Devices

•

Monitoring and Troubleshooting for Security Devices

Documentation

SRX210 Services Gateway Front Panel and Back Panel Views (Low Memory, High

Memory, and PoE Versions) on page 9

•

• SRX210 Services Gateway Power Supply on page 19

SRX210 Services Gateway Cooling System

The cooling system for the SRX210 Services Gateway with Low Memory, High Memory,

or Power over Ethernet (PoE) includes one fixed fan.

The cooling system works from side-to-rear in the services gateway chassis. The fans

draw air through vents along the left and right sides of the chassis and exhaust the air

through the rear side of the chassis.

The airflow produced by the fans keeps device components within the acceptable

temperature range.

Figure 6 on page 19 shows the airflow through the chassis for the SRX210 Services

Gateway with Low Memory, High Memory, and PoE models.

SRX210 Services Gateway Hardware Guide

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 175 176

Keine Kommentare

Juniper-networks SRX 210 Bedienungsanleitung Seite 34