Juniper-networks J4350 Bedienungsanleitung PDF herunterladen (Seite 37)

System Overview

Each Services Router has six front panel slots for field-replaceable PIMs. These

slots are numb

ered from top to bottom and from left to right as shown in

the slot number diagram on th e front panel, shown in Figure 8 .

Figure 8: Slot Number Diagram on Front Panel

g003823

Gigabit Eth

ernet and 4-port Fast E th ernet ePIMs can be installed in high-speed s lots

only. High-speed s lots are indicated by a b lack triangle co ntaining an E in the front

panel slot nu mber diagram. On J4350 Services Routers, the high-speed slots are slo t

3andslot6.

On J6350 Services Routers, the high-speed slots are slots 2, 3, 5, and 6.

Slot 0 is the

fixed interface module that contains the built-in Ethernet ports.

Power B utton and POWER LED

The power button is locate d on the left side of the front pan e l (see

Figure 7).

You can use the power button to power the Services Router

on and off. When you power on the router, the Routing Engine boots as

the power supp ly completes its startup sequ en ce.

The

POWER LED is located to the upper left of the LED dashboard.

Table 7 des

cribes the

POWER LED.

Table 7: PO

WER LED

Color State Description

On steadily Power is functioning correctly.

Green

Blinking Power b utton has been pressed and quickly released, and

the router is gracefully shutting down.

Unlit Off

Router is not receiving power.

After the router is powered on, status in d icators—such as LEDs on the

front panel and

show chassis comm and ou tp ut—c an take up to 60 seconds

to indicate that the power supply is functioning normally. Ignore error

indicato rs that appear during the first 60 seconds.

If you need to power off the router after the Routing Engine finishes booting, use

the J -Web interface or the CLI to halt the Services Router first. For instruc tions,

see the J-series Services Router Administration Guide.

J4350 and J6350 Services Router Hardware Features 17

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 283 284

Kommentare zu diesen Handbüchern

Keine Kommentare

Juniper-networks J4350 Bedienungsanleitung Seite 37

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Hardware Juniper-networks J4350