Juniper-networks JUNOS OS 10.4 Bedienungsanleitung PDF herunterladen (Seite 92)

unit 0 {

vlan-id 100;

}

ge-0/0/2 {

unit 0 {

vlan-id 100;

}

ge-0/0/3 {

unit 0 {

vlan-id 100;

}

[edit dynamic-profiles]

green_vpls_pw_2 interfaces $junos-interface-ifd-name {

unit $junos-underlying-unit-number {

vlan-tags outer 200 inner 100;

}

NOTE: This is not a complete router configuration.

With this configuration, broadcast packets inside frames arriving with VLAN identifier

100 on ge-0/0/1 are normalized to a frame with VLAN identifier 100 (in this case, they

are unchanged). The broadcast packet and frames exiting ge-0/0/2 or ge-0/0/3 are

unchanged as well, according to the interface configuration. Frames egress the VPLS

pseudowire in routing instance green with an outer VLAN tag value of 200 pushed on top

of the normalized value.

Documentation

Dynamic Profiles for Interfaces and Protocols•

• Dynamic Profiles for VPLS Pseudowires on page 67

• Example: Configuring VPLS Pseudowires with Dynamic Profiles—Complex Solutions

on page 72

Example: Configuring VPLS Pseudowires with Dynamic Profiles—Complex Solutions

Dynamic profiles for VPLS pseudowires can be helpful in a variety of VLAN configurations.

This section explores some of these situations through examples.

NOTE: These examples are not complete router configurations.

All of the examples in this section address the same basic topology. A routing instance

blue uses a trunk bridge to connect different departments in an organization, each with

Junos OS 13.1 MX Series 3D Universal Edge Routers Solutions Guide

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 207 208

Keine Kommentare

Juniper-networks JUNOS OS 10.4 Bedienungsanleitung Seite 92