Juniper-networks JUNOS OS 10.4 Bedienungsanleitung PDF herunterladen (Seite 166)

pdu-threshold 5;

}

Configure LFM on the PE2 router with CCC:

[edit]

interfaces ge-1/0/0 {

encapsulation ethernet-ccc;

unit 0;

}

protocols {

oam {

ethernet {

link-fault-management {

interface ge-1/0/0 {

pdu-interval 1000;

pdu-threshold 5;

}

Documentation

Ethernet OAM•

• Ethernet OAM Link Fault Management on page 143

• Example: Configuring Ethernet LFM Between Provider Edge and Customer Edge on

page 144

• Example: Configuring Ethernet LFM for Aggregated Ethernet on page 146

• Example: Configuring Ethernet LFM with Loopback Support on page 148

Example: Configuring Ethernet LFM for Aggregated Ethernet

In this example, LFM is configured on an aggregated Ethernet interface (AE0) between

Router 1 and Router 2. When configured on aggregated Ethernet, LFM runs on all the

individual member links. LFM is enabled or disabled on the member links as they are

added or deleted from the aggregation group. The status of individual links is used to

determine the status of the aggregated interface.

The use of LFM with aggregated Ethernet is shown in Figure 21 on page 147.

Junos OS 13.1 MX Series 3D Universal Edge Routers Solutions Guide

1 2 ... 161 162 163 164 165 166 167 168 169 170 171 ... 207 208

Keine Kommentare

Juniper-networks JUNOS OS 10.4 Bedienungsanleitung Seite 166