Juniper-networks E-Series Bedienungsanleitung PDF herunterladen (Seite 111)

Upgrading NVS Cards on SRP Modules

E-Series Routers

9-5

Replacing an NVS Card

To replace an NVS card on an SRP module:

1 Obtain an antistatic container for the NVS card you will remove (see

Storing Modules and Components, earlier in this chapter).

2 With a small flathead screwdriver, remove the faceplate from the

NVS card slot on the SRP module (see Figure 9-1).

3 Use the screwdriver to depress the button next to the NVS card (see

Figure 9-1).

This action releases the NVS card.

Figure 9-1 NVS card slot on SRP module

4 Remove the NVS card and place it in the antistatic container.

5 Insert the new NVS card into the slot.

6 Push the new NVS card as far as you can in the slot.

When you push the card far enough, it will click into place.

7 Replace the faceplate on the NVS card slot.

Faceplate

Release button

NVS card

g013763

1 2 ... 106 107 108 109 110 111 112 113 114 115 116 ... 241 242

Keine Kommentare

Juniper-networks E-Series Bedienungsanleitung Seite 111